• High Speed Hybrid Detector for TCSPC

• Instrument response function 120 ps FWHM

• No afterpulsing

• GaAsP cathode

• Overload protection

• Direct interfacing to all bh TCSPC systems

• 3 mm cathode diameter

• Power supply and control via DCC-100 module

• Clean response, no tails or secondary peaks
   

HPM-100-50

• High Speed Hybrid Detector for TCSPC

• Instrument response function 125 ps FWHM

• No afterpulsing

• GaAs cathode

• Sensitivity up to 900 nm

• Overload protection

• Direct interfacing to all bh TCSPC systems

• 3 mm cathode diameter

• Power supply and control via DCC-100 module

• Clean response, no tails or secondary peaks
   

id100 from Id Quantique

data sheet, evaluation note,  prices

• Ultra-Low Noise versions available: 20µm < 1cps, 50µm < 20cps

• Time resolution 40 ps

• Low dark count rate ( typically 50 Hz )

• Low dead time ( 45 ns )

• Peak photon detection @ 500 nm

• Active area diameter of 20 µm or 50µm

• Standard 50 Ohm output ( BNC )

• Not damaged by strong illumination

• C-MOUNT adapter
   

• Time resolution 200 ps

• High QE (50% peak)

• Low Noise (typical 100 cps )

• Internal cooling

• Useful photocathode 5 mm

• Standard 50 Ohm output ( BNC )

• Operated via bh DCC-100 detector controller
   

• Time resolution 25 ps IRF with
  bh TCSPC modules

• Low Noise

• Compact profile

• Useful photocathode 11 mm

• Standard 50 Ohm output ( SMA )
   

PMC-100

data sheet, prices

• Cooling Control and Overload Shutdown via bh DCC-100 module

• Excellent TCSPC Instrument Response: < 200 ps FWHM

• Internal GHz Preamplifier: High Output Amplitude

• Internal GHz Preamplifier

• Overload Indicator and TTL / CMOS Overload Output

• +12V Supply - Internal High Voltage Generator!

• Excellent Noise Immunity

• Standard C Mount AdapterExcellent Photon Counting Performance

• Direct Interfacing to all bh Photon Counting Devices

• Operated via bh DCC-100 detector controller
   

SPAD-8

data sheet

• 8-channel SPAD detector module

• bh multi-dimensional TCSPC technique

• Interfaces directly to all bh TCSPC systems

• Simultaneous measurement in all 8 channels

• 1 x 8 arrangement of detector channels

• Instrument response width 70 ps FWHM

• Max. count rate >5 MHz

• Thermo-electrically cooled

• Power supply anc control via bh DCC-100 detector controller card
   

• Operation via bh DCC-100 detector controller

• High voltage power supply included

• 16 Channel TCSPC with bh SPC Modules

• Simultaneous Measurement in all 16 channels

• 1 by 16 Arrangement of Detector Channels

• Time Resolution 200 ps FWHM

• Spectral Ranges:  300-650 nm, 300-820 nm

• Count Rate up to  4 MHz

• Part of the bh Multi-spectral FLIM Detection system
   

• Avalanche Photodiode Module   

• Active Areas from 0.03 mm² to 7 mm²

• 150 ps Pulse Rise Time / 320 ps FWHM

• Internal Temperature Compensation

• Spectral Range from 330 nm to 1100 nm

• Single +12V supply
   

• Photodiode Module   

• Pulse Response Width 400 ps

• Pulse Rise Time <200 ps

• Spectral Range 330-1050 nm

• Current Indicator

• +5V or +12 V Supply

• Photodiode Module   

• Pulse Response Width 400 ps

• Pulse Rise Time <200 ps

• Spectral Range 330-1050 nm

• +5V or +12 V Supply
  
   

• Integrating Photodiode Module

• Pulse Energy Measurement

• Low Noise, High Dynamic Range

• Sensitivity in the fJ Range

• Active Area from 0.25 to 7.5 mm²

• Power Supply ±5 to ±15 V
   

• Excellent Photon Counting Performance

• Time Resolution < 200 ps FWHM

• Spectral Ranges: 300-650 nm, 300-820 nm, 185-820 nm

• Count Rate > 10 MHz

• Internal GHz Preamplifier

• Overload Indicator LED

• +12V Supply - No HV required!

• Small Size, Low Cost