id100 from
Id Quantique |
data sheet,
evaluation note,
prices |
 |
 |
Ultra-Low Noise versions available: 20µm <
1cps, 50µm < 20cps
|
|
Time resolution 40 ps
|
|
Low dark count rate ( typically 50 Hz )
|
|
Low dead time ( 45 ns )
|
|
Peak photon detection @ 500 nm
|
|
Active area diameter of 20 µm or 50µm
|
|
Standard 50 Ohm output ( BNC )
|
|
Not damaged by strong illumination
|
|
C-MOUNT adapter
|
|
| Applications:
Time-Correlated Single Photon Counting,
Single molecule detection, Fluorescence correlation spectroscopy |
|
H7422
from
Hamamatsu |
data sheet |
 |
|
Time
resolution 200 ps
|
|
High QE
(50% peak)
|
|
Low Noise (typical 100 cps )
|
|
Internal cooling
|
|
Useful photocathode 5 mm
|
|
Standard 50 Ohm output ( BNC )
|
|
Operated via bh DCC-100 detector controller
|
|
| Applications:
Time-Correlated Single Photon Counting,
Single molecule detection, Fluorescence correlation spectroscopy |
|
R3809
from
Hamamatsu |
data sheet |
 |
|
Time
resolution 25 ps IRF with
bh TCSPC modules
|
|
Low Noise
|
|
Compact profile
|
|
Useful photocathode 11 mm
|
|
Standard 50 Ohm output ( SMA )
|
|
| Applications:
Time-Correlated Single Photon Counting,
Single molecule detection, Fluorescence correlation spectroscopy |
|
PMC-100 |
data sheet,
prices |
 |
|
Cooling Control and Overload Shutdown via bh DCC-100 module
|
|
Excellent TCSPC Instrument Response: < 200 ps FWHM
|
|
Internal GHz Preamplifier: High Output Amplitude
|
|
Internal GHz Preamplifier
|
|
Overload Indicator and TTL / CMOS Overload Output
|
|
+12V Supply - Internal High Voltage Generator!
|
|
Excellent Noise Immunity
|
|
Standard C Mount AdapterExcellent Photon Counting Performance
|
|
Direct Interfacing to all bh Photon Counting Devices
|
|
Operated via bh DCC-100 detector controller
|
|
Applications:
Time-Correlated, Steady State and Gated Photon Counting,
Non-descanned Detector for TCSPC Imaging
|
|
|
PMH-100 |
data sheet,
prices |
|
|
Excellent Photon Counting Performance
|
|
Time Resolution < 200 ps FWHM
|
|
Spectral Ranges: 300-650 nm, 300-820 nm, 185-820 nm
|
|
Count Rate > 10 MHz
|
|
Internal GHz Preamplifier
|
|
Overload Indicator LED
|
|
+12V Supply - No HV required!
|
|
Small Size, Low Cost
|
|
|
|
|
|
PML-16-C |
data sheet,
operating manual,
prices |
 |
|
Operation via bh DCC-100
detector controller
|
|
High voltage power supply
included
|
|
16 Channel TCSPC with
bh SPC Modules
|
|
Simultaneous Measurement in all 16 channels
|
|
1 by 16 Arrangement of Detector Channels
|
|
Time Resolution 200 ps FWHM
|
|
Spectral Ranges: 300-650 nm, 300-820 nm
|
|
Count Rate up to 4
MHz
|
|
Part of the bh Multi-spectral FLIM Detection
system
|
|
Applications:
Time-Correlated, Steady State and Gated Photon Counting,
Non-descanned Detector for TCSPC Imaging
|
|
|
APM-400 |
data sheet,
prices |
 |
|
Avalanche Photodiode Module
|
|
Active Areas from 0.03 mm² to 7 mm²
|
|
150 ps Pulse Rise Time / 320 ps FWHM
|
|
Internal Temperature Compensation
|
|
Spectral Range from 330 nm to 1100 nm
|
|
Single +12V supply
|
|
|
|
PHD-400 |
data sheet,
prices |
 |
|
Photodiode Module
|
|
Pulse Response Width 400 ps
|
|
Pulse Rise Time <200 ps
|
|
Spectral Range 330-1050 nm
|
|
Current Indicator
|
|
+5V or +12 V Supply
|
|
|
|
PDM-400 |
data sheet,
prices |
 |
|
Photodiode Module
|
|
Pulse Response Width 400 ps |
|
Pulse Rise Time <200 ps |
|
Spectral Range 330-1050 nm |
|
+5V or +12 V Supply
|
|
|
|
PDI-400 |
data sheet,
prices |
 |
|
Integrating Photodiode Module
|
|
Pulse Energy Measurement
|
|
Low Noise, High Dynamic Range |
|
Sensitivity in the fJ Range |
|
Active Area from 0.25 to 7.5 mm² |
|
Power Supply ±5 to ±15 V
|
|
|
|
OCF-401 |
data sheet,
prices |
 |
|
Optical Constant Fraction Discriminator
|
|
Accurate triggering on optical
pulses |
|
Time walk < ±30 ps for 1 ns pulse
and 1:10 pulse amplitude change |
|
1V output pulse amplitude |
|
Single +5 V supply |
|
Trigger indicator LED |
|
| |
|
|
|
