1. To install drivers for BH modules when system finds new hardware ( PCI card) or to update drivers for BH modules in Windows Device Manager ( if required ) use : - files from subdir drv_64 BHDriver1471 (bhdrvr1470.sys signed with bh1471.inf file ) in Windows 8/10/11 64-bit systems 2. To install TCSPC software package v.7.1 execute: tcspc_setup_64.exe file in Windows 8/10/11 64-bit systems 3. Installation of National Instruments CVI Run Time Engine v.1900 is necessary for the proper functioning of the installed components. Full RTE installation is included in the TCSPC Package and will be executed at the end (only if it was not done yet earlier on your computer). RTE installation can be done also (in case of problems) using 'BH_cvirte_install.exe' from 'C:\\Program Files (x86)\\BH\\common\\cvirte_install' subdirectory 4. You can choose components to install or update from the following list : SPCM v. 9.90 - control & measurement software for SPC-6x0/7x0/830/140/15x/16x/18x/130-EMx/130Ix/SPC-QC-104/004 including all -NX and -NXX versions and DPC-230 modules SPCM DLL v. 5.3.0 with LabView Drivers - 32 & 64 bit Windows DLL to control SPC modules SPCImage v. 8.9 - Lifetime Image Analysis software for SPC measurement data DCC v. 3.1 - control software for DCC-100 module DCU v. 1.70 - control software for DCU ( USB Detector Control Unit ) DCC DLL v. 3.1.0 with LabView Drivers - 32 & 64 bit Windows DLL to control DCC-100 and DCU modules Note: The installation program uses Windows Installer technology. Windows Installer must be installed yet on your machine in order to install the software. -------------------------------------------------------------------------- Release Notes: -------------------------------------------------------------------------- TCSPC v.7.1 released on 01.02.2024: * New software components: SPCM v.9.90, SPCImage v. 8.9, SPCM DLL v.5.3.0, DCC v.3.1,, DCU v.1.7, DCC DLL v.3.1 BH Xilinx Loader v.2.4 -------------------------------------------------------------------------- TCSPC v.7.0 released on 15.05.2023: * New software components: SPCM v.9.89, SPCImage v. 8.8, SPCM DLL v.5.2.0, DCC v.3.0,, DCU v.1.6, DCC DLL v.3.0 BH Drivers v.3.2 , BH Xilinx Loader v.2.3 BH LabView Drivers for SPC ( v.27 ), SPC-QC ( v.27) and DCC ( v.27) included ( in DLL subdirs) -------------------------------------------------------------------------- TCSPC v.6.9 released on 15.12.2022: * New software components: SPCM v.9.88, SPCImage v. 8.7, SPCM DLL v.5.1.0, DCC v.2.9, DCC DLL v.2.9, BH Xilinx Loader v.2.2 BH LabView Drivers for SPC ( v.26 ) & SPC-QC-104 ( v.26) included ( in DLL subdirs) -------------------------------------------------------------------------- TCSPC v.6.8 released on 07.06.2022: * New software components: SPCM v.9.87, SPCImage v. 8.6, SPCM DLL v.5.0.0, DCC v.2.8, DCC DLL v.2.8, DCU v.1.5 * BH LabView Drivers for SPC ( v.24 ) & DCC ( v.21) included ( in DLL subdirs) * BH Xilinx Loader v.2.1 included in BH\Common\Xilinx Loader subdir for updating Xilinx firmware (if required) on new DCC/DDG/GVD/SPC modules -------------------------------------------------------------------------- TCSPC v.6.7 released on 28.09.2021: * New software components: SPCM v.9.86, SPCImage v. 8.5, SPCM DLL v.4.9.0, DCC v.2.7, DCC DLL v.2.7, DCU v.1.4 * installation of signed driver BH Driver147 (bhdrvr1470.sys) using new bh1470.inf * stopped support for Windows 7 and 32-bit operating systems !! do not try to install BH Driver147 in Window 7 - blue screen and system damage possible -------------------------------------------------------------------------- TCSPC v.6.6 released on 11.03.2021: * installation of signed driver BH Driver123 (bhdrvr1230.sys) using new bh1231.inf which includes SPC-180 definition * New software components: SPCM v.9.85, SPCImage v. 8.4, SPCM DLL v.4.8.0, DCC v.2.6, DCC DLL v.2.6, DCU v.1.3 -------------------------------------------------------------------------- TCSPC v.6.5 released on 26.10.2020: * Package resolves problems with installation of NI CVI RTE v.1900 * No new software components included -------------------------------------------------------------------------- TCSPC v.6.4 released on 01.10.2020: * New software components: SPCM v.9.84, SPCImage v. 8.3, SPCM DLL v.4.7.0, DCC v.2.5, DCC DLL v.2.5, new DCU v.1.2 ( USB Detector Control Unit ) -------------------------------------------------------------------------- TCSPC v.6.3 released on 12.02.2020: * New software components: SPCM v.9.83, SPCImage v. 8.1, SPCM DLL v.4.6.0, DCC v.2.4, DCC DLL v.2.4, new DCU v.1.1 ( USB Detector Control Unit ) * uses new CVI RTE v.19.0.0 instead of v.15.0.1 -------------------------------------------------------------------------- TCSPC v.6.2 released on 04.07.2019: * New software components: SPCM v.9.82, SPCImage v. 8.0, SPCM DLL v.4.5.0 -------------------------------------------------------------------------- TCSPC v.6.1 released on 12.12.2018: * New software components: SPCM v.9.81, SPCImage v. 7.4, DCC v.2.3, DCC DLL v.2.3 -------------------------------------------------------------------------- TCSPC v.6.0 released on 12.07.2018: * New software components: SPCM v.9.80, SPCM DLL v.4.4.1, SPCImage v. 7.3 -------------------------------------------------------------------------- TCSPC v.5.9 released on 02.05.2018: * New software components: SPCM v.9.79, SPCImage v. 7.1 -------------------------------------------------------------------------- TCSPC v.5.8 released on 16.04.2018: * New software components: SPCM v.9.78, SPCImage v. 7.0, SPCM DLL v.4.4, SPCM LabView libraries v.4.4 -------------------------------------------------------------------------- TCSPC v.5.7 released on 23.10.2017: * New software components: SPCM v.9.77, SPCImage v. 6.4 -------------------------------------------------------------------------- TCSPC v.5.6 released on 14.07.2017: * New software components: SPCM v.9.76, SPCImage v. 6.2 -------------------------------------------------------------------------- TCSPC v.5.5 released on 28.03.2017: * installation of new signed driver BH Driver123 (bhdrvr1230.sys) instead of BHdriver12 to solve BH drivers installation problems on computers with Windows 10 Anniversary Update and SecureBoot Enabled ( in BIOS) * uses new CVI RTE v.15.0.1 instead of v.15.0.0 - problem of crashing exe on exit 64-bit SPCM on Windows 10 is solved * New software components: SPCM v.9.75, SPCImage v. 6.0, DCC v.2.2 SPCM DLL v.4.3.0, SPCM LabView libraries v.4.3, DCC DLL v.2.2.0 -------------------------------------------------------------------------- TCSPC v.5.4 released on 06.12.2016: * New software components: SPCM v.9.74, SPCImage v. 5.7, DCC v.2.10 -------------------------------------------------------------------------- TCSPC v.5.3 released on 28.09.2016: * New software components: SPCM v.9.73, SPCImage v. 5.6 -------------------------------------------------------------------------- TCSPC v.5.2 released on 08.07.2016: * New software components: SPCM v.9.72, SPCImage v. 5.5 -------------------------------------------------------------------------- TCSPC v.5.1 released on 16.03.2016: * New software components: SPCM v.9.71, SPCImage v. 5.4, SPCM DLL v.4.2.1 -------------------------------------------------------------------------- TCSPC v.5.0 released on 11.11.2015: * installation of signed BHdriver12 v.12.0.0 instead of BHdriver v.11.6.0 for compatibility on Windows 10 * installation of CVI RTE v.15.0.0 instead of v.12.0.1 - printing works on 64-bit applications * New software components: SPCM v.9.70, DCC v. 2.0, SPCImage v. 5.3 SPCM DLL v.4.2.0, DCC DLL v.2.0.0 -------------------------------------------------------------------------- TCSPC v.4.7 released on 09.06.2015: * New software components: SPCM v.9.67, SPCImage v. 5.2 -------------------------------------------------------------------------- TCSPC v.4.6 released on 09.01.2015: * New software components: SPCM v.9.66, SPCImage v. 5.0 SPCM DLL v.4.1.1 -------------------------------------------------------------------------- TCSPC v.4.5.1 released on 23.09.2014: * New software components: SPCM v.9.65 -------------------------------------------------------------------------- TCSPC v.4.5.0 released on 09.09.2014: * New software components: SPCM v.9.64, SPCImage v. 4.9.7 -------------------------------------------------------------------------- TCSPC v.4.4.0 released on 10.07.2014: * New software components: SPCM v.9.63, SPCM DLL v.4.1 DCC v.1.7, DCC DLL v.1.5, SPCImage v. 4.9.6 * installation of signed BHdriver v.11.6.0 instead of Windriver v.10.2 no more problems with driver installation under Windows 8/8.1 -------------------------------------------------------------------------- TCSPC v.4.3.1 released on 30.04.2014 : * New software components: SPCM v.9.61, SPCImage v. 4.9.0, SPCM DLL v.4.0 SPCM LabView libraries v.4.0 * Fixed installation problems of all required 64bit system DLLs -------------------------------------------------------------------------- TCSPC v4.3.0 released on 18.02.2014 : * New software components: SPCM v.9.60, SPCImage v. 4.8.0, DCC v.1.60 -------------------------------------------------------------------------- TCSPC v4.2.0(.8) released on 22.08.2013 : * corrected tcspc_setup_64.exe - missing DLLs in installation of 64-bit version of SPCM software ( SPCM64) caused FCS curves fitting did not work correctly -------------------------------------------------------------------------- TCSPC v4.2.0(.7) released on 06.08.2013 : * New software components: SPCM v.9.55, SPCImage v. 4.3.2 * installs 1st version of SPCM64 - 64-bit SPCM application -------------------------------------------------------------------------- TCSPC v4.1.0 released on 27.03.2013 : * New software components: SPCM v.9.51, SPCM DLL v.3.31, SPCImage v. 4.0.6 * installation of CVI RTE v.12.0.1 instead of v.9.1.1 - no support for Windows NT/2000 -------------------------------------------------------------------------- TCSPC v4.0.0 released on 16.11.2012 : * New software components: SPCM v.9.50, SPCM DLL v.3.3, SPCImage v. 3.9.7 -------------------------------------------------------------------------- TCSPC v3.9.0 released on 04.09.2012 : * New software components: SPCM v.9.45, SPCImage v. 3.9.3 -------------------------------------------------------------------------- TCSPC v3.8.0 released on 14.06.2012 : * New software components: SPCM v.9.44, SPCImage v. 3.8.9 SPCM DLL v.3.2, 32 & 64 bit versions -------------------------------------------------------------------------- TCSPC v3.7.0 released on 27.04.2012 : * New software components: SPCM v.9.43, SPCImage v. 3.7.7 SPCM DLL v.3.1, 32 & 64 bit versions DCC DLL v.1.4, 32 & 64 bit versions SPCM LabView libraries v.3.1 -------------------------------------------------------------------------- TCSPC v3.6.0 released on 14.02.2012 : * New software components: SPCM v.9.42, SPCImage v. 3.5.0 -------------------------------------------------------------------------- TCSPC v3.5.1 released on 02.12.2011 : * New software components: SPCM v.9.41 -------------------------------------------------------------------------- TCSPC v3.5.0 released on 28.10.2011 : * New software components: SPCM v.9.40, SPCM DLL v.3.01, SPCM LabView libraries v.3.0 SPCImage v. 3.4 -------------------------------------------------------------------------- TCSPC v3.4.0 released on 10.05.2011 : * New software components: SPCM v.9.30, SPCM DLL v.3.00, SPCImage v. 3.2.3 -------------------------------------------------------------------------- TCSPC v3.3.0 released on 21.03.2011 : * New software components: SPCM v.9.21, DCC v.1.51, SPCImage v. 3.2.1 -------------------------------------------------------------------------- TCSPC v3.2.0 released on 14.12.2010 : * New software components: SPCM v.9.20, SPCM DLL v.2.90, SPCImage v. 3.2.0 -------------------------------------------------------------------------- TCSPC v3.1.0 released on 30.09.2010 : * 2 versions of the package for 32 and 64 bit Windows * installation of Windriver v.10.2 instead of v.9.2.1 * New software components: SPCM v.9.10, SPCM DLL v.2.80 SPCM LabView libraries v.2.80 DCC v.1.50, DCC DLL v.1.30 STP DLL v.2.2 -------------------------------------------------------------------------- TCSPC v3.0.0 released on 20.04.2010 : * New software components: SPCM v.9.00, SPCM DLL v.2.75 DCC v.1.44, DCC DLL v.1.24 SPCImage v. 3.1.0 -------------------------------------------------------------------------- TCSPC v2.9.5 released on 21.10.2009 : * New software components: SPCM v.8.98, SPCM DLL v.2.74 DCC v.1.43, DCC DLL v.1.23 SPCImage v. 3.0.8 -------------------------------------------------------------------------- TCSPC v2.9.4 released on 30.06.2009 : * New software components: SPCM v.8.97, SPCImage v. 2.9.10 -------------------------------------------------------------------------- TCSPC v2.9.3 released on 30.03.2009 : * New software components: SPCM v.8.96, SPCImage v. 2.9.9 -------------------------------------------------------------------------- TCSPC v2.9.2 released on 15.01.2009 : * New software components: SPCM v.8.95, SPCM DLL v.2.73, SPCImage v. 2.9.7 -------------------------------------------------------------------------- TCSPC v2.9.1 released on 21.10.2008 : * New software components: SPCM v.8.94, SPCM DLL v.2.72 with LabView libraries for SPC and DPC modules SPCImage v. 2.9.5 -------------------------------------------------------------------------- TCSPC v2.9.0 released on 09.09.2008 : * New software components: SPCM v.8.93, SPCM DLL v.2.71 with LabView libraries for SPC and DPC modules DCC v.1.42, DCC DLL v.1.22 SPCImage v. 2.9.4 STP DLL v.2.1.1 -------------------------------------------------------------------------- TCSPC v2.8.0 released on 04.07.2008 : * New software components: SPCM v.8.92, SPCM DLL v.2.70 with LabView libraries for SPC and DPC modules !! new - SPCM DLL can be used also for DPC modules DCC v.1.41, DCC DLL v.1.21 -------------------------------------------------------------------------- TCSPC v2.7.4 released on 25.03.2008 : * New software components: SPCM v.8.91, SPCM DLL v.2.68 -------------------------------------------------------------------------- TCSPC v2.7.3 released on 26.02.2008 : * New software components: SPCM v.8.90, SPCM DLL v.2.67, SPCImage v. 2.9.2 -------------------------------------------------------------------------- TCSPC v2.7.2 released on 08.10.2007 : * New software components: SPCM v.8.82 -------------------------------------------------------------------------- TCSPC v2.7.1 released on 10.09.2007 : * New software components: SPCM v.8.81 -------------------------------------------------------------------------- TCSPC v2.7.0 released on 10.08.2007 : * New software components: SPCM v.8.80, SPCM DLL v.2.66, DCC v.1.4, DCC DLL v.1.2 STP DLL v.2.1 -------------------------------------------------------------------------- TCSPC v2.6.3 released on 10.05.2007 : * New software components: SPCM v.8.72, SPCM DLL v.2.65, SPCImage v. 2.9.1, DCC v.1.3, DCC DLL v.1.1 -------------------------------------------------------------------------- TCSPC v2.6.2 released on 12.04.2007 : * Minor changes in SPCM v.8.71, SPCM DLL v.2.64 -------------------------------------------------------------------------- TCSPC v2.6.1 released on 04.04.2007 : * New software components: SPCM v.8.71, SPCM DLL v.2.64 -------------------------------------------------------------------------- TCSPC v2.6.0 released on 19.02.2007 : * New software components: SPCM v.8.70, SPCM DLL v.2.63, SPCImage v. 2.9 -------------------------------------------------------------------------- TCSPC v2.5.5 released on 17.11.2006 : * New software components: SPCM v.8.67, SPCM DLL v.2.62 -------------------------------------------------------------------------- TCSPC v2.5.4 released on 10.10.2006 : * New software components: SPCM v.8.66 -------------------------------------------------------------------------- TCSPC v2.5 released on 25.09.2006 : * New software components: SPCM v.8.65, SPCM DLL v.2.61 with LabView library for LabView v.7.1, SPCImage v.2.8.7, CVI RTE 8.01 -------------------------------------------------------------------------- TCSPC v2.4 released on 07.10.2005 : * New software components: SPCM v.8.5, SPCM DLL v.2.41, SPCImage v.2.8.3 -------------------------------------------------------------------------- TCSPC v2.3 released on 25.05.2005 : * New software components: SPCM v.8.4, SPCM DLL v.2.4with LabView library for LabView v.7.1 -------------------------------------------------------------------------- TCSPC v2.2 released on 28.01.2005 : * New software components: SPCM v.8.3, SPCM DLL v.2.3, SPCImage v.2.8 -------------------------------------------------------------------------- TCSPC v2.1 released on 07.10.2004 : * New software components: SPCM v.8.2, SPCM DLL v.2.22, SPCImage v.2.7, DCC v.1.23 -------------------------------------------------------------------------- TCSPC v2.0 released on 07.05.2004 : * New software components: SPCM v.8.1, SPCM DLL v.2.21, SPCImage v.2.61 -------------------------------------------------------------------------- TCSPC v1.9 released on 28.11.2003 : * New software components: SPCM v.8.0, SPCM DLL v.2.2, SPCImage v.2.6 * New LabWindows CVI RTE v.7.0 now installed and used by BH applications -------------------------------------------------------------------------- TCSPC v1.8 released on 26.08.2003 : * New software components: SPCM v.7.9, DCC v.1.22, SPCM DLL v.2.1, SPCImage v.2.5 * Base folder for saving applications files can now be selected -------------------------------------------------------------------------- TCSPC v1.71 released on 02.04.2003 : * New software components: SPCM v.7.81, SPCM DLL v.2.01 -------------------------------------------------------------------------- TCSPC v1.7 released on 28.03.2003 : * New software components: SPCM v.7.8, SPCM DLL v.2.0 with LabView library, SPCImage v.2.41 -------------------------------------------------------------------------- TCSPC v1.61 released on 24.02.2003 : * Small improvments & bugs fixups in installation package ( no new software components ) -------------------------------------------------------------------------- TCSPC v1.6 released on 29.01.2003 : * New software components: SPCM v.7.7, SPCM DLL v.1.9 with LabView library, SPCImage v.2.4 * New WinDriver v.5.22 installation procedure * Registration of components which require license number -------------------------------------------------------------------------- TCSPC v1.5 released on 19.09.2002 : * New software components: SPCM v.7.61, DCC v.1.21, DCC DLL v.1.01, SPCImage v.2.3 * Bug fixed for 1st installation of SPCM on Win9x systems ( cviogl.dll not copied to system directory) -------------------------------------------------------------------------- TCSPC v1.4 released on 22.08.2002 : * New software components: DCC v.1.2, DCC DLL v.1.0, SPCImage v.2.2 * Fixup for installation problem on machines with Windows 2000 SP3 caused by WinDriver ( new WinDriver v.5.05B included ) -------------------------------------------------------------------------- TCSPC v1.3 released on 02.08.2002 : * Bug fixup for installation which requires license number